Contact Us

CP : Agung ( 08119202819 )
Phone: 031-3974836
Fax: 031-3974834
Email :This email address is being protected from spambots. You need JavaScript enabled to view it.

Friday, 11 October 2013 09:03

Hydraulic Pipe Cutting & Beveling Machine

Product Name: Hydraulic Pipe Cutting and Beveling Machine
Patent No: 200820083224.3
Description:
Driven by hydraulic motor, adjustable cutting speed, Wide processing range; long life performance. Continuous operations. It is used for cutting and beveling pipes with thick wall pipes.
 
Rated Pressure = 10MPa
Rated Flux = 25L/min
Electric Motor Power = 200r/min
Output Torque M=260N.M
Electric Motor Power N = 7.5KW Electric Motor Rate N = 1450r/min
Timing Range = 0-20r/min
 
 
Model Capacity (OD.) Wall Thickness
HYD-168 25.4 - 168.3mm [1" - 6"] < 25mm
HYD-219 50.8 - 219mm [2" - 8"] < 25mm
HYD-273 114.3 - 273mm [4" - 10"] < 25mm
HYD-323 168 - 323mm [6" - 12"] < 25mm
HYD-355 177.8 - 355.6mm [7" - 14"] < 25mm
HYD-406 254 - 406.4mm [10" - 16"] < 25mm
HYD-457 323.9 - 457.2mm [12" - 18"] < 25mm
HYD-508 355.6 - 508mm [14" - 20"] < 25mm
HYD-610 457.2 - 609.6mm [18" - 24"] < 25mm
HYD-762 609.6 - 762mm [24" - 30"] < 25mm
HYD-914 762 - 914.4mm [30" - 36"] < 25mm
HYD-1066 914.4 - 1066.8mm [36" - 42"] < 25mm
HYD-1220 1066.8 - 1219.3mm [42" - 48"] < 25mm

If the O.D is larger than the model type above, please discuss with us.

Published in Aotai
Friday, 11 October 2013 09:01

NC Pipe Cutting And Beveling Machine

Product Name : NC PIPE CUTTING AND BEVELLING MACHINE
Patent NO : ZL200420104472.3
Description :
Driven by the servo motor of high-power PLC control system,control the speed of feed lt can realize stepless (speed) change regulation.
Standard power  : 220V ( 380V : 440V selectable )
Rated power : 2-3KW
Rated Frequency : 50-60Hz
Timing range : 0-20r/min
Output Torque : 15N.M
Features :
High speed rotation,driven by low-energy consumption electric motor,easy operation,competitive. lighter weight, minimal radial space, easy to operate.APPLICATION RANGE:They are widely used in the fields of petroleum, chemical, natural gas, power supply,construction, boiler and nuclear power.

 

 

 

TECHNICAL PARAMETER :

A. METRIC STANDARD

Model Capacity (OD. mm) Wall thickness (mm)
Rotating Rate (rpm)
ISD-80 Ф10-80 ≤25 20rpm
ISD-150 Ф65-150 ≤25 16rpm
ISD-300 Ф150-300 ≤25 13rpm
ISD-450 Ф300-450 ≤25 10rpm
ISD-600 Ф450-600 ≤25 8rpm
ISD-750 Ф600-750 ≤25 7rpm
ISD-900 Ф750-900 ≤25 6rpm
ISD-1050 Ф900-1050 ≤25 5rpm
ISD-1160 Ф980-1160 ≤25 5rpm
ISD-1240 Ф1120-1240 ≤25 5rpm
ISD-1300 Ф1150-1300 ≤25 5rpm
ISD-1500 Ф1300-1500 ≤25 5rpm

 

B. BRITISH STANDARD

Model Capacity (OD. mm) Wall thickness (mm)
Rotating Rate (rpm)
ISD-168 25.4-168.3 [1"-6"] ≤25 20rpm
ISD-219 50.8-219 [2"-8"] ≤25 16rpm
ISD-273 114.3-273 [4"-10"] ≤25 13rpm
ISD-323 168.3-323 [6"-12"] ≤25 10rpm
ISD-355 177.8-355.6 [7"-14"] ≤25 8rpm
ISD-406 254-406.4 [10"-16"] ≤25 7rpm
ISD-457 323.9-457.2 [12"-18"] ≤25 6rpm
ISD-508 355.6-508 [14"-20"] ≤25 5rpm
ISD-610 457.2-609.6 [18"-24"] ≤25 5rpm
ISD-762 609.6-762 [24"-30"] ≤25 5rpm
ISD-914 762-914.4 [30"-36"] ≤25 5rpm
ISD-1066 914.4-1066.8 [36"-42"] ≤25 5rpm
ISD-1220 1066.8-1219.2 [42"-48"] ≤25 5rpm


STANDARD TOOLS :

 

0°Cutting Tool   30°Beveling Tool   37°Beveling Tool   15°inside Beveling Tool
machine other bevel angles or alloy steel, cast steel, please declare before purchase order.

Published in Aotai
Friday, 11 October 2013 09:01

Pneumatic Pipe Cutting And Beveling Machine

Product Name : Pneumatic pipe Cutting and bevelling machine
Patent NO : ZL200520307232.6
Description :
Driven by pneumatic motor,No-spark in the process of working,safe and reliable operation,lt could be suitable for inflammable and dangerous working.
Power : 0.5-2.5KW
Air Working Pressure : 0.6-1.5Mpa
Air Consuming Flux : 1500-2000 L/min.
Features :
High speed rotation,driven by low-energy consumption pneumatic motor,easy operation,competitive. lighter weight, minimal radial space, easy to operate.APPLICATION RANGE:They are widely used in the fields of petroleum, chemical, natural gas, power supply,construction, boiler and nuclear power.

 

 

TECHNICAL PARAMETER :

A. METRIC STANDARD

Model Capacity (OD. mm) Wall thickness (mm)
Rotating Rate (rpm)
ISD-80  Ф10-80  ≤25 20rpm
ISD-150 Ф65-150 ≤25 16rpm
ISD-300 Ф150-300 ≤25 13rpm
ISD-450 Ф300-450 ≤25 10rpm
ISD-600 Ф450-600 ≤25 8rpm
ISD-750 Ф600-750 ≤25 7rpm
ISD-900 Ф750-900 ≤25 6rpm
ISD-1050 Ф900-1050 ≤25 5rpm
ISD-1160 Ф980-1160 ≤25 5rpm
ISD-1240 Ф1120-1240 ≤25 5rpm
ISD-1300 Ф1150-1300 ≤25 5rpm
ISD-1500 Ф1300-1500 ≤25 5rpm

 

B. BRITISH STANDARD

Model Capacity (OD. mm) Wall thickness (mm)
Rotating Rate (rpm)
ISD-168 25.4-168.3 [1"-6"] ≤25 20rpm
ISD-219 50.8-219 [2"-8"] ≤25 16rpm
ISD-273 114.3-273 [4"-10"] ≤25 13rpm
ISD-323 168.3-323 [6"-12"] ≤25 10rpm
ISD-355 177.8-355.6 [7"-14"] ≤25 8rpm
ISD-406 254-406.4 [10"-16"] ≤25 7rpm
ISD-457 323.9-457.2 [12"-18"] ≤25 6rpm
ISD-508 355.6-508 [14"-20"] ≤25 5rpm
ISD-610 457.2-609.6 [18"-24"] ≤25 5rpm
ISD-762 609.6-762 [24"-30"] ≤25 5rpm
ISD-914 762-914.4 [30"-36"] ≤25 5rpm
ISD-1066 914.4-1066.8 [36"-42"] ≤25 5rpm
ISD-1220 1066.8-1219.2 [42"-48"] ≤25 5rpm


STANDARD TOOLS :

 

0°Cutting Tool   30°Beveling Tool   37°Beveling Tool   15°inside Beveling Tool
machine other bevel angles or alloy steel, cast steel, please declare before purchase order.

Published in Aotai
Friday, 11 October 2013 08:59

Electric Pipe Cutting & Beveling Machine

Product Name : Electric pipe Cutting and bevelling machine
Patent NO : ZL200420107231.4
Description :
High speed rotation,driven by low-energy consumption electric motor,easy operation,competitive
Voltage : 220V
Frequency : 50Hz
Grant Current : 6A
Power : 0.5-2.5KW
Features :
lighter weight, minimal radial space, easy to operate.APPLICATION RANGE:They are widely used in the fields of petroleum, chemical, natural gas, power supply,construction, boiler and nuclear power.

 

TECHNICAL PARAMETER :

A. METRIC STANDARD

Model Capacity (OD. mm) Wall thickness (mm)
Rotating Rate (rpm)
 ISD-80  Ф10-80  ≤25  20rpm
ISD-150 Ф65-150 ≤25 16rpm
ISD-300 Ф150-300 ≤25 13rpm
ISD-450 Ф300-450 ≤25 10rpm
ISD-600 Ф450-600 ≤25 8rpm
ISD-750 Ф600-750 ≤25 7rpm
ISD-900 Ф750-900 ≤25 6rpm
ISD-1050 Ф900-1050 ≤25 5rpm
ISD-1160 Ф980-1160 ≤25 5rpm
ISD-1240 Ф1120-1240 ≤25 5rpm
ISD-1300 Ф1150-1300 ≤25 5rpm
ISD-1500 Ф1300-1500 ≤25 5rpm

 

B. BRITISH STANDARD

Model Capacity (OD. mm) Wall thickness (mm)
Rotating Rate (rpm)
ISD-168  25.4-168.3 [1"-6"]  ≤25  20rpm
ISD-219 50.8-219 [2"-8"] ≤25 16rpm
ISD-273 114.3-273 [4"-10"] ≤25 13rpm
ISD-323 168.3-323 [6"-12"] ≤25 10rpm
ISD-355 177.8-355.6 [7"-14"] ≤25 8rpm
ISD-406 254-406.4 [10"-16"] ≤25 7rpm
ISD-457 323.9-457.2 [12"-18"] ≤25 6rpm
ISD-508 355.6-508 [14"-20"] ≤25 5rpm
ISD-610 457.2-609.6 [18"-24"] ≤25 5rpm
ISD-762 609.6-762 [24"-30"] ≤25 5rpm
ISD-914 762-914.4 [30"-36"] ≤25 5rpm
ISD-1066 914.4-1066.8 [36"-42"] ≤25 5rpm
ISD-1220 1066.8-1219.2 [42"-48"] ≤25 5rpm


STANDARD TOOLS :

0°Cutting Tool   30°Beveling Tool   37°Beveling Tool   15°inside Beveling Tool
machine other bevel angles or alloy steel, cast steel, please declare before purchase order.

Published in Aotai
Page 3 of 3

Follow us

Subscribe

You can subscribe your below this with your email to get more some update our product and another promotion.

Maps